Yesterday I went to the site on a mountain where I am trying to distribute internet. I had lot of works there so I went early than usual. I had a good reliable wireless point to point link between the tower in the office to the site with two Power …
I have been working on making a wireless network for internet distribution and have been recording some of my works. I wrote about Ubiquiti Lite AP Link: Line of Sight vs. Fresnel Zone and Struggles with Ubiquiti Lite AP and PowerBeam Connections .…
Earlier this week, I shared how I was struggling to connect two Ubiquiti Lite AP 120 antennas . After two more days of attempts, I’m still facing the same issue between my office and home, which are about 350 meters apart. At one point, I dismounted…
I just wanted to write some notes on difference between two PtP and PtMP radio and antenna for WISP network deployment. I have used Ubquiti Lite AP, Lite Beam and Power Beam. Now I have started using the TP-Link wireless outdoor antenna radio such …
Yesterday I attempted to link two Ubiquiti Lite AP units, one at my home and the other at my WISP office, but couldn’t get them to connect. I tested both ends, using wireless and LAN connections. While I could access the Lite AP interface through t…
I had also bought recently TP-link CPE210, EAP110 and EAP225 for testing and then deploying them a sub urban area in the mountains. Both EAP110 and EAP225 are outdoor AP(Access Point) but their is only few hundreds. EAP110 which is 2.4GHz AP for wi…
Here is the question. I am trying to set up a CPE510 as an access point and use the Archer C20 as a range extender. I configured the Archer C20 in extender mode and it was able to detect and save the SSID from the CPE510. I can connect to the CPE210…
I have been trying to launch a WISP(Wireless Internet Service Provider). I started to provide to a mountainous rural village. I had a point to point link(PtP) from my office to the village using two Ubiquiti PowerBeam 5AC radio antenna. I had to rep…
I have mikrotik router connected to EAP225, EAP110, CPE510 connected to port 6,4 and 2(LAN bridge) in office, WAN input is dynamic IP from ISP connected to port 3. The CPE510 is setup as AP with another CPE510 at home setup as STA. When CPE510 is t…
TP-Link is one of major wireless product manufacturer and distributor in the world. I have been interested to see if the TL-Link radios and antenna are good or better for WISP equipment. Here I wanted to write note on CPE510 wireless long distance i…
I have been running an WISP(Wireless Internet Service Provider) and was looking for radio and antenna other than Ubiquiti. I am using Ubiquiti products but want to use other brand now because many of the ubiquiti antenna+radio got damaged. I don'…
I have used Ubiquiti products and though they were simple and easy to deploy, they get easily damaged. I have multiple times repaired Lite AP and now I have unrepairable Power Beam(at least where I live). So I thinking about using the TP-link produc…
I have few various ubiquiti antenna and radio but some are got malfunctioning now like the Lite AP 120(LBE-5AC-120) degree sectored antenna. I have three of them and only one is working. I want to check whether I can repair these antenna, how…
Here I wanted to note down solution to blinking of Ubiquiti Power Adaptor Led. This problem can be observed after the ethernet cable is inserted to the some of Ubiquiti antenna radio equipments such as the Ubiquiti Power Beam 5AC. tried a 48V on my …
I had bought couple of Lite AP Ac 5GHz sectored antenna for my WISP project. They all got damaged, I had to repair all of them. One is being actively used for wireless internet connection which is paired with Lite Beam 5AC which is radio with antenn…
I am learning electronics repair and circuit design as well as running an WISP project. I have been using mikrotik router and switches and ubiquity radio and antenna for the WISP network. I have paired Lite Beam AC 5GHz with Lite AP 120 sectored an…
As a growing Wireless Internet Service Provider (WISP), having a reliable and scalable RADIUS server is critical for managing user authentication, authorization, and accounting (AAA). Many small WISP operators initially use MikroTik's built-in U…
In the world of network management, RADIUS (Remote Authentication Dial-In User Service) servers are crucial for managing authentication, authorization, and accounting (AAA) in various network setups. Two popular options are SAS 4 Radius and FreeRA…
When configuring a MikroTik CCR2004-16G-2S+ router for load balancing with connections from two different ISPs—one static IP and one dynamic IP—you might encounter unusual behavior such as the dynamic IP connection showing the static IP of the other…
Bonding in MikroTik routers like MikroTik switches(CRS326-24G-2S+RM) refers to the process of combining multiple physical network interfaces into a single logical interface. This aggregated interface behaves like a single connection, but with the …
